1. Main structure of steel wire braided hose

The inner rubber layer is made of nitrile rubber with good oil resistance as the main raw material, and a special reinforcing agent is added to the mixture.
 The high-quality hose special steel wire is used as the braided reinforcement layer (the hose is divided into I, Layers Ⅱ and Ⅲ), made of synthetic rubber with superior
 weather resistance as the outer rubber layer.

2. Main features of steel wire braided hose
High-pressure steel wire braided hose has good oil resistance, heat resistance and aging resistance. The pipe body is tightly combined, can withstand high pressure,
 has excellent flexural resistance and pulse resistance. It is suitable for a wide range of media and can be transported in the range of -40℃-+100℃. Petroleum-based liquid,
 water-based liquid, gas and other media with certain pressure and temperature. In order to ensure the safety during use and extend the service life of the hose, please refer
o the following operating temperatures according to the media transported by the hose: Oil-based medium: -40℃—+100℃ Water-based medium:  ≤+80℃ 

3 Precautions for steel wire braided hose:
1. The bending radius should not be less than the given bending radius to prevent damage to the steel wire braided hose skeleton or premature damage due to overstretching.
 2. According to the conditions of use, correctly select the type and specification of steel wire braided hose, and do not use it incorrectly or substitute it. 
3. When using steel wire braided hose, the pressure should be adjusted evenly and slowly to avoid damage to the pipe body due to sudden pressure increase. 
4. When the working location changes, it should be moved off the ground and not mopped to avoid scratching the outer rubber and affecting the skeleton layer. 
5. When transporting corrosive liquids, the inside should be cleaned after use to prevent residues from corroding the pipe body for a long time, or use corresponding series
 of products.